Innovative Drilling Services
For any project.
Exceptional Overburden Performance
Foremost DR 24 drills have been proven repeatedly in some of the toughest unconsolidated overburden formations, including sand, gravel, glacial till and boulders. The Dual Rotary method minimizes the likelihood of loss circulation and aquifer cross-contamination. The DR can drill without fluids, the ability to detect water in low-flow formations is improved.
Casing
We can drill from 6 up to 24” cased holes with the DR Drill Rig and can install 24″ casing, to any depth depending on soil conditions. With 250 Caldweld boring machine using a Vibro Hammer where necessary, we can drill to 48″ Diameter casing.
Control of Discharge
Cuttings are diverted through the discharge swivel and can be directed via a hose to a safe and convenient dumping and monitoring point. This is a useful feature when drilling at homeowner sites or when cutting must be contained for environmental or safety reasons.
Micro Plies
Micro plies are (6”) small caissons usually used for bearing weight or pinning to rock.
Rock Sockets & Bridge Caissons
24” casing is socketed 3ft into the rock for weight bearing and bridge support.
Alignment Holes For Tunnels
Drilled with a DR24 drill rig, generally with 12” casing.
Vibro Hammer Work
The vibro hammer is used to vibrate tube pilings, I beam pilings, and sheet piles for Cofferdams into the ground.
Hydraulic Elevator
New installs and refits, (Inside building, off the rails.)
Water Well Drilling
Commercial & Residential.
Exceptional Overburden Performance
Foremost DR 24 drills have been proven repeatedly in some of the toughest unconsolidated overburden formations, including sand, gravel, glacial till and boulders. The Dual Rotary method minimizes the likelihood of loss circulation and aquifer cross-contamination. The DR can drill without fluids, the ability to detect water in low-flow formations is improved.
Casing
We can drill from 6 up to 24” cased holes with the DR Drill Rig and can install 24″ casing, to any depth depending on soil conditions. With 250 Caldweld boring machine using a Vibro Hammer where necessary, we can drill to 48″ Diameter casing.
Control of Discharge
Cuttings are diverted through the discharge swivel and can be directed via a hose to a safe and convenient dumping and monitoring point. This is a useful feature when drilling at homeowner sites or when cutting must be contained for environmental or safety reasons.
Micro Plies
Micro plies are (6”) small caissons usually used for bearing weight or pinning to rock.
Rock Sockets & Bridge Caissons
24” casing is socketed 3ft into the rock for weight bearing and bridge support.
Alignment Holes For Tunnels
Drilled with a DR24 drill rig, generally with 12” casing.
Vibro Hammer Work
The vibro hammer is used to vibrate tube pilings, I beam pilings, and sheet piles for Cofferdams into the ground.
Hydraulic Elevator
New installs and refits, (Inside building, off the rails.)
Water Well Drilling
Commercial & Residential.
Our Fleet
Rigs and equipment to get the job done right.
Texoma 700 Series Auger Drill
Capable of drilling wide-diameter holes.
Hydro-Vac Truck
A Hydrovac is a piece of equipment that uses high pressure water to cut and liquify the soil, while simultaneously using high volume vacuum to remove the soil from the excavation.
John Deere 420 Back Hoe and Pump Truck
The Pump Truck carries all the tooling to completely install submersible pumps/water systems and pressure tanks. Thus making a complete keylock situation for your water well needs.
Calwell 250B Boring Rig
Larger diameter wells, can be bored with our 2508 Calwell Boring Rig. It is capable of boring up to a 54” diameter hole, to a depth of 100 feet.
5 Ton Vibro Hammer
The Vibro Hammer is capable of driving any size casing from 12” to 60” to the depth of 100 feet.
Foremost DR24 Drill Rig
With the Foremost DR24 Rotary Drills we are capable of drilling holes from 6“ to 24” diameter. One of the DM4’s is mounted on an Intemational and the other is mounted on a Mack. Both rigs drill easily through formations where other types of rigs experience problems. The Foremost DR Rigs drill and case simultaneously without use of casing hammers, under reamers or mud. The lower drive transmits pull-back, pull-down and rotational forces to the casing, literally screwing the casing into the ground.
Inside Drilling Machine & Equipment
Inside drilling or “Off Rail”, most commonly referred to, is done by attaching a drill rig to the rails used to mount the elevator car.
When experiencing difficulty in the overburden we have the option of using buckets, augers, Tricone bits or our SD12 Down-the-hole hammer. We also have a 130 ton Power Pack system to pull existing casing to re-drill.
Hydraulic Power Unit
The Hydraulic Unit is used for power to drive drilling unit for “Off Rail” products.
Calwell 150 Boring Rig
Texoma 700 Series Auger Drill
Capable of drilling wide-diameter holes.
Hydro-Vac Truck
A Hydrovac is a piece of equipment that uses high pressure water to cut and liquify the soil, while simultaneously using high volume vacuum to remove the soil from the excavation.
John Deere 420 Back Hoe and Pump Truck
The Pump Truck carries all the tooling to completely install submersible pumps/water systems and pressure tanks. Thus making a complete keylock situation for your water well needs.
Calwell 250B Boring Rig
Larger diameter wells, can be bored with our 2508 Calwell Boring Rig. It is capable of boring up to a 54” diameter hole, to a depth of 100 feet.
5 Ton Vibro Hammer
The Vibro Hammer is capable of driving any size casing from 12” to 60” to the depth of 100 feet.
Foremost DR24 Drill Rig
With the Foremost DR24 Rotary Drills we are capable of drilling holes from 6“ to 24” diameter. One of the DM4’s is mounted on an Intemational and the other is mounted on a Mack. Both rigs drill easily through formations where other types of rigs experience problems. The Foremost DR Rigs drill and case simultaneously without use of casing hammers, under reamers or mud. The lower drive transmits pull-back, pull-down and rotational forces to the casing, literally screwing the casing into the ground.
